Certificate II in Plumbing (Pre-apprenticeship)

Plumbers are in high demand and have the freedom to work for themselves or as a valued employee in construction companies. Prepare yourself for your plumbing apprenticeship with this 28 week practical program.
Ballarat - SMB
Location
Semester 1
Semester 2
Other intakes
Ballarat - SMB
Semester 1
Semester 2
-
Other intakes
-
View all semester start dates
Length
26 weeks (2 days per week)
Qualification Code
22304VIC

Free TAFE

This course is in the Free TAFE for Priority Courses list. Find out about the initiative and your eligibility

Plumbers are in high demand along with having the freedom to work for themselves or as a valued employee in construction companies. Prepare yourself for your plumbing apprenticeship with this 28 week  practical program. You'll take the first step towards your career, while showing your future employer that you have the drive and skills to succeed in your apprenticeship. You'll learn in our state-of-the-art Building and Construction Training Centre, gaining skills like reading and interpreting plans and specifications, producing technical drawings and using plumbing pipes, fitting and fixtures.

  • Apprentice plumber

Completion of this program may enable you to advance as an apprentice plumber. You will also have the awareness to follow up other desired careers.

The course content below provides all possible units related to the course. If the course has various streams, the units you are required to study will depend on your chosen stream.

WRITE SIMPLE DOCUMENTS
BSBWRT301
CARRY OUT MEASUREMENTS AND CALCULATIONS
CPCCCM1015A
READ AND INTERPRET PLANS AND SPECIFICATIONS
CPCCCM2001A
WORK SAFELY IN THE CONSTRUCTION INDUSTRY
CPCCOHS1001A
APPLY OHS REQUIREMENTS, POLICIES AND PROCEDURES IN THE CONSTRUCTION INDUSTRY
CPCCOHS2001A
PREPARE TO WORK SAFELY IN THE CONSTRUCTION INDUSTRY
CPCCWHS1001
CARRY OUT INTERACTIVE WORKPLACE COMMUNICATION
CPCPCM2039A
PRODUCE TECHNICAL DRAWINGS
CUVACD303A
PROVIDE BASIC EMERGENCY LIFE SUPPORT
HLTAID002
APPLY BASIC SHEET METAL PRACTICES
VU21789
CUT AND PENETRATE BUILDING MATERIALS AND STRUCTURES
VU21790
FABRICATE SIMPLE PLUMBING PIPE SYSTEMS
VU21791
IDENTIFY CAREER PATHWAYS IN THE PLUMBING INDUSTRY
VU21792
PERFORM BASIC OXY-ACETYLENE WELDING AND CUTTING
VU21793
PREPARE TO WORK IN THE PLUMBING INDUSTRY
VU21794
USE AND APPLY BASIC LEVELLING EQUIPMENT FOR PLUMBING
VU21795
USE BASIC ELECTRIC WELDING EQUIPMENT AND TECHNIQUES
VU21796
USE BASIC PLUMBING HAND TOOLS
VU21797
USE BASIC POWER TOOLS
VU21798
USE PLUMBING PIPES, FITTINGS AND FIXTURES TO SIMULATE PLUMBING INSTALLATIONS
VU21799

The application method varies depending on your circumstances, please visit our TAFE application page for further information.

For information in relation to the University and students rights and responsibilities please refer to the VET Information Guide.

Applicants need to demonstrate the literacy and numeracy skills required to undertake this course through a test as part of the application process. The test will be conducted through Federation College prior to commencement of training. Feedback will be provided to the applicant on their results and types of support, if necessary, available to them.

The application method varies depending on your circumstances, please visit our How to apply page for further information.

VTAC application: No

Direct application: Yes

Federation University code: LAK

National course code: 22304VIC

Entry requirements (year 12)

Entry requirements (non year 12)

Students enter the program through a program selection session.

16 hours per week - Monday and Tuesday 8am to 5pm

Fees are subject to change annually.

Fees are payable at the time of enrolment. In addition your program may require you to purchase books and materials. Some of these costs may be payable on enrolment day.

For further information regarding these costs, please view 2020 Indicative Course Fees (pdf, 756kb) for tuition and materials fees payable to FedUni.  

Indicative government-subsidised and full-fee course fees are shown on this document, and should be read in conjunction with the information on the TAFE fees website.

Eligible applicants/students accessing government-subsidised training under the 'Skills First Program' need to be aware enrolling in a qualification may affect their ability to access future government-subsidised training.

For further information please refer to the Fees, charges and eligibility on the TAFE fees website.
 

2020 TAFE Eligibility Exemptions

 

You could be eligible for government subsidised study at Federation University Australia through the TAFE eligibility exemptions. 

If you have been deemed ineligible for a government subsidised place because you have a higher qualification or have commenced two qualifications at the same level you may be eligible to enrol in a government subsidised place with a TAFE eligibility exemption. Please refer to the TAFE fees website or contact the course coordinator
 

Please note: A limited number of TAFE eligibility exemptions are available so contact us now to secure your place for 2020.

Other study costs

For information regarding eligibility for a Government subsidised place, go to the TAFE fees webpage.

Please note that some materials are included in the above fee, however students will also be required to purchase a basic tool kit which is approximately $500.00, and wear their own Navy Action Back Overalls and steel cap work boots.

 

If what you have learned at work, from other programs, courses, from life experience or training provided at work is relevant to this program, you may be entitled to gain subject credits or exemptions. The University is obliged to recognise the AQF qualifications and statements of attainment issued by other registered training organisations. For further details contact Federation University on 1800 333 864.

Frequestly asked questions

Q: Do I need to attend an interview?
A: Yes. After you have completed a TAFE Direct Application form, you will be contacted to attend an interview.

Q: Do I have to be an apprentice to do this course?
A: No, you do not.

Q: Is there a uniform?
A: Yes, all students must wear Navy Action Back Overalls and steel cap work boots.

Students are encouraged to seek work experience on Fridays during the course with a licensed plumber to enhance their learning and job prospects. This needs to be arranged by the student.

A range of student services are available at most campuses. For further information on these services or for course information, please contact us on 1800 333 864.

The commencement of all programs is subject to available funding and enrolment quotas.

All information contained in this program overview including the availability of programs and fees, is correct at the time of being published, however the University reserves the right to alter any program, procedure or fee. Students should check for any amendment prior to enrolment.

CRICOS Provider No.00103D.
Please note: This training is delivered with Victorian and Commonwealth Government funding to eligible individuals.
National RTO Code: 4909.

 

 

School department

Federation TAFE